Hotfix Rhinestone Cheer Bow Tail Transfer – Pick Design, Color & Quantity

Add professional sparkle to cheer bows with a ready-to-press SS10 hotfix rhinestone strip. Choose from 22 scatter patterns, eight rhinestone colors, and individual or team quantities.

Original Design Choices — 1–6

• 1. Hourglass Sparkle: approximately 2.75" W × 11.83" H — 318 stones
• 2. Falling Sparkle: approximately 2.76" W × 11.56" H — 298 stones
• 3. Full Glam Hourglass: approximately 2.77" W × 10.79" H — 584 stones
• 4. Left-Side Wave: approximately 2.72" W × 11.79" H — 395 stones
• 5. Right-Side Wave: approximately 2.72" W × 11.79" H — 395 stones
• 6. Classic Hourglass: approximately 2.74" W × 11.71" H — 360 stones

Additional Design Choices — 7–22

Designs 7–22 are made to fit a standard 3-inch-wide cheer-bow ribbon tail. These designs use SS10 rhinestones measuring approximately 3.3 mm (0.13") each. The exact transfer length varies by design.

• 7. Dense Hourglass
• 8. Full Scatter V-Tail
• 9. Center Burst
• 10. Falling Side Scatter
• 11. Wavy Lines
• 12. Center Arch
• 13. Light Hourglass
• 14. Dense Arch
• 15. Light Top Fade
• 16. Heavy Top Fade
• 17. Diagonal Sweep
• 18. Stacked Chevrons
• 19. Side Burst
• 20. Full Glam V-Tail
• 21. Center Sparkle Stripe
• 22. Diamond Center Stripe

Rhinestone Colors

Crystal Clear, Crystal AB, Jet (Black), Topaz, Siam, Sapphire, Emerald, and Hot Pink.

Quantity Information

One strip decorates one bow tail. Select a pair when you need two matching strips for both tails of one bow. Team quantities contain the same selected design and color.

Product Details

• Physical ready-to-press rhinestone transfer only
• No SVG, PNG, DXF, CDR, EPS, Cricut file, bow, or apparel is included
• SS10 hotfix rhinestones — approximately 3.3 mm (0.13") each
• Designed for standard 3-inch cheer-bow ribbon tails
• Made to order by RhinestoneLA
• Measurements are approximate

Heat-Press Instructions

1. Position the transfer on clean, dry bow material.
2. Cover with a Teflon sheet or parchment paper.
3. Press at approximately 320°F (160°C) for 15–20 seconds using medium pressure.
4. Allow the transfer to cool, then slowly peel the carrier sheet. Repress if needed.

Important: Always test the heat and pressure on your bow material first. Colors may appear slightly different because of lighting and screen settings.